Pulse UV irradiation system/ Pulse Xenon / Pulsed UV

No thermal distortion, High power&purity, Low cost, Energy-saving,Eco-friendly For UV Curing,water sterilizer,coating

1. non-mercury light technology to reduce environmental pollution 2. pulsed mode, continuous mercury emission than the traditional way of saving 40-60% 3. instant high-energy ultraviolet, UV penetrating more 4. without thermal block system 5. no additional cooling system 6. thermal radiation significantly reduced the total elimination of thermal radiation on the impact of the irradiated products 7. the coincidence of the total elimination of halide reaction 8. exposure time in milliseconds for the unit, so that more precise control of UV-hardening 9. can change the wavelength of the energy distribution, to adapt to more applications 10. random direction of 360 degrees, more flexible technology11. modular design, easy integration into production equipment 12. fast curing, increased productivity 13. instantly switch lamps without preheating

Pulse technical Parameters: 

1. Irradiation area can be customized, we now have three kinds of radiation area is: 100mm * 300mm, R150mm, 90mm * 560mm. 2. Xenon lamp’s mono-pulsed energy: 14J --- 100J.  

Adjustable frequency: 1-100 Hz.

UV radiation power > 10---2000mw/cm2 (light lamps at a distance of 40mm)

3. Spectral range: xenon lamp spectrum is very rich between 190-860nm can be filtered out large heat long wavelength of light waves through the coating.

4. Service life: lamp’s life can flash more than 10 million times (can up to 20 million times if used properly); power of life of 5,000 hours or more. In accordance with the use of 10 hours a day, can be 3 years.5. Electric power: minimum output power 14 --- 100 watts (when the frequency of 1Hz), the maximum output power of 5,000 watts (when the frequency is 50Hz).6. tube sizesa. U-shaped lamps: tube diameter of 8mm, the total length of 368mm, the effective light-emitting length 285mm, the distance between electrodes is 25mm.b. long straight tube: tube diameter of 8mm, the total length of 610mm, the effective light-emitting length 508mm, the distance between electrodes is 610mm.c. Spiral Lamp: Lamp diameter of 8mm, the maximum screw diameter 120mm, the distance between electrodes was 50mm.7. Xenon lamp power supply volume: L * W * H = 420mm * 333mm * 176mm.  U-tube light box: L * W * H = 580mm * 100mm * 150mm.  Long straight tube lamp: L * W * H = 720mm * 220mm * 140mm.

Pulsed UV light source’s Main applications:

1. Blue-ray curing2. UV vegetable processing3. UV water treatment, air treatment4. Curing for furniture, wood and cell phone plastic case UV ink, paint 5. High-density semiconductor array adhesive curing 6. Laboratory simulation of solar

Pulse UV irradiation system/ Pulse Xenon / Pulsed UV