electronical 4w/cm2 395nm UV LED curing equipment

instant-start withou preparation No thermal radiation smaller UV LED curing No maintaining cost long life:>25000H

 electronical 2w/cm2 395nm UV LED curing equipment 

1. The cooling surface of UV LED area light irradiation system is a few times larger than the UV LED point light source, have good heat dissipation. Lifetime can reach 25000-30000 hours. Not affect the opening and closing times life, with cable output, compared to the traditional way of exposure LAMP machine, replace the lamp frequency, high power consumption, needs to UV Fiber output, UV-LED can you reduce the cost of equipment, supplies, equipment utilization 2. No infrared light emitted, so the surface of the irradiated product have no temperature rise, but the traditional style UV LAMP machine usually makes the surface of the irradiated products increased 60-90 °C, the product positioning is shifted, resulting in poor product3. Uniform irradiation, the changes of the irradiation intensity in center or edge do not exceed 3%, good consistency, compared to mercury lamp 4. Stable light output, and higher irradiance, higher energy, better uniformity, instant light, instantly 100% UV output power, the maximum radiation intensity can be 1500mW/cm25. Can be customized according to user's needs: irradiation region, shape, size, etc. 6. UV-LED light source lamp doesn’t need preheating, no toxic mercury. It is a safer, more environment-friendly machine to replace the traditional mercury lamp.7. Small volume: the volume of LED controller is about 1/8 of irradiation machine with the traditional lamp, making the equipment easier to be installed; Small light irradiation head, fully considering the space requirements for precision production, making the equipment easier and more convenient to be installed

8. Unique fan cooling: quick heat emission, increase the stability of power output, extend the LED’s lifetime.

UV-LED area light source controller technical specifications:

Type			UVEC-4II
UV radiation heads			4 - n LEDs
Controller size			180L*100W*146H
Terminal I/O		Input	Pedal switch & serial RS-232 communication signals
		Output	serial RS-232 communication signals
Cooling method of controller			Semiconductor cooling
Radiation Modes		General radiation	constant power radiation
		Mode radiation	Step power radiation
		Pedal mode	Pedal control
Power supply voltage			AC220V±15%(50/60HZ)
Environmental temperature			0°C—50°C
Environmental humidity			20%—80%RH
Electric power	Work power for whole equipment		Single head power:DC4V==0.73A  3.5W Standby controller power:DC12V==0.18A 2.2W

UV-LED area light source radiation system’s applications:

1 Large area of light curing2 mobile shell coating curing3 cable, fiber outer coating curing4 inkjet printing5 Catalytic Materials Irradiation6 biological experiments7 UV paint curing for high-end furniture

electronical 4w/cm2 395nm UV LED curing equipment